Help - Search - Members - Calendar
Full Version: Scanning Slides Or 120 Roll
PhotographyBLOG Forums > Digital Photography > Scanners
Genieslot
GenieslotWhat is the best resolution to scan slides or Trannies for an A-3 Print. I have been scanning at 800dpi
markgoldstein
Are they 35mm slides/negatives? If so then 800 dpi won't be enough resolution. You should scan at the maximum optical resolution that your scanner is capable of - what model do you own?
Genieslot
Hi It is a CANOSCAN 990F and I scan 120 tRANS and 35ML SLIDES.fROMM Genieslot
markgoldstein
I couldn't find anything about this scanner via Google - just the 9900F model. How old is the 990F?
Genieslot
Hi, Its new bought it a few weeks ago, Jessops recommended it. Just scanned a few slides at the most resolution it would take and it took ages, but did print out better.
Genieslot
By the way, it is the 9900f modal you saw.
markgoldstein
OK - you will definitely want to scan at the 3200 dpi optical resolution, even if it does take a long time smile.gif
waltem
Scanning resolution usually depends on the size of the image you want to print, and you would normally want to print at 240 - 300 DPI so for a 10 x 8 print you would need a scan of 2400 - 3000 PPI (or thereabouts) for a decent print. That said, I always scan at the higest possible resolution and maximum bit depth (16 bits if your scanner is capable of it).
waltem
PS, there is an online calculator to help calculate scan resolutions at http://www.scantips.com/calc.html

Regards

Mike
Tsavo
Now consider how much you value your time.

Each time you need to do a scan it takes you the better part of ten minutes for low quality but you will never want to save them.

Scan at the highest quality because, you should Scan once, Burn to CD once.

Me? I am frustrated by anything slow, but more so by having to do the same job twice.
xvvvz
I agree with the scan once at a large files size, more specifically at the highest *true* optical resolution for your scanner (not interpolated or marketing hype numbers). With some scanners, even if you scan larger than you need and then reduce, there can be the added benefit of what appears to be a reduction in noise that occures during the size reduction process.

Doug
Reclusive
QUOTE (waltem @ May 13 2004, 10:35 AM) *
PS, there is an online calculator to help calculate scan resolutions at http://www.scantips.com/calc.html

Regards

Mike



Hi Mike, like this site you found, have book marked it
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2012 Invision Power Services, Inc.