Fujifilm X-Pro1 Firmware Update 2.00

September 6, 2012 | Zoltan Arva-Toth | Compact System Camera | 1 Comment |
News image

Fujifilm has announced a firmware update for the Fujifilm X-Pro1 compact system camera. Version 2.00 promises a “significant improvement” in auto focus speeds in challenging lighting conditions, and also makes it easier to focus the camera manually. The firmware upgrade also enables the Fujifilm X-Pro1 to “write to memory card twice as fast as before.” Firmware Version 2.00 will be available to download on 18th September.

Fujifilm Press Release

Firmware update ver 2.00 improving the performance of the Fujifilm X-Pro1

Fujifilm is pleased to announce the release later this month of new firmware for the Fujifilm X-Pro1, designed to improve performance and enhance the users’ photographic experience.

Since the launch of the X-Pro1 in early 2012, Fujifilm has received customer feedback on the camera’s performance and is addressing the issues raised by launching a firmware upgrade.

On the installation of the new firmware, consumers will see a significant improvement in speed of Auto Focus, improved manual focus and processing/ writing speeds.

Improvements made after firmware update:

1.Improved performance of auto focus*1
Focussing in challenging lighting conditions, where light is low or bright, will now be much faster in Auto Focus mode. The focusing distance has also been improved, allowing you to get closer to the subject and capture a great shot without switching to macro mode.

2.Manual Focus improved performance
Improved operability
The speed of the image coming into focus when turning the focus ring has been vastly improved. When adjusting the focus ring using the electronic viewfinder or the LCD panel on the back of the camera it is now much easier to focus, always displaying the image closer to full aperture with minimum depth of field.

New addition of 3x magnification for checking focus
The 10x magnifications / focus check feature on the X-Pro1 has been well received and in this firmware update an additional 3x option is now available. It is also now possible to find the optimum focus point whilst viewing the entire screen.

3.Improved writing speed/ processing speed.
Improved writing speed to memory card
At maximum speed the X-Pro1 can now write to memory card twice as fast as before. *2

Improved speed for playback after shooting
Image playback now occurs less than one second after pressing the image playback button. On some occasions previously, for example when using continuous shooting, you had to wait until the images had been processed before they were shown on screen.

4. Other additional functions:
1.Auto (6400) has been added to the ISO setting. This increased ISO not only speeds up the shutter speed, but also stabilises the image and mitigates blurring of the subject.

*1: The effect will differ according to the lens attached.
*2: the effect will differ according to the card type and image compression.

Launch date of the dedicated firmware: September 18th, 2012 6:00a.m. (GMT)?

To enable these features, please update the firmware of your Fujinon XF lenses at the same time.

The firmware can be downloaded from “Support” on the Fujifilm website. Please go to the support website below for details on other changes. Firmware available at Fujifilm global website: http://www.fujifilm.com/support/digital_cameras/



Tracker Pixel for Entry

Your Comments

1 Comment | Post a Comment

#1 Paul Thomas

If they release an equivalent for x10 will be happy. Theres room for improvement in the focus there to.

Better than the pro versions for some reason but does lock up a lot.

9:33 am - Thursday, September 6, 2012