Nikon Coolpix P7000 Firmware Version 1.2
Mac users, we're pleased to announce Macphun's all-in-one photo editor Luminar is now available for just $69£52 with special Valentine Day bonuses (two eBooks, Vivid Wonderland preset pack, & Creative Sky Overlay pack) included for free until February 19. Use coupon code "PHOTOBLOG" to save another $10 on Luminar.
We rated Luminar as "Highly Recommended". Visit the Luminar web site to try it for free.
Nikon has posted a firmware update for the Nikon Coolpix P7000 digital compact camera. Version 1.2 improves auto focus accuracy, enables the use of auto exposure bracketing in combination with the self-timer, and fixes a number of bugs. You can download the firmware update from the website below.
Modifications enabled in this version
Autofocus performance has been increased for more reliable focus acquisition on the intended subject, reducing the number of cases in which focus on the subject was not acquired or focus was acquired on the background when the shutter-release button was pressed halfway.
Auto bracketing and the self timer can now be enabled at the same time.
Aperture settings at or near maximum aperture were grayed out and apparently unavailable for selection (selection was actually possible) when the following procedure was performed. This issue has been resolved.
1. An aperture value other than maximum aperture was applied with shooting in [A] (aperture-priority auto) mode.
2. The camera was turned off .
3. The camera was turned on again.
4. The user attempted to adjust the aperture setting (aperture settings at or near maximum aperture grayed out).
An issue that prevented operation of the specified function when the shutter-release button was pressed while the Fn (function) button was held down in [M] (manual) mode has been resolved.
An issue that in some rare cases caused inaccurate shutter speed display in [M] (manual) mode has been resolved.
An issue that caused an asterisk (*) to be displayed, and continue to be displayed even when settings were reverted to their default values, next to the Vivid Picture Control (COOLPIX Picture Control) option when User Setting U3 was enabled has been resolved.
The results of adjustments to White balance>Choose color temp. using the P7000’s NRW (RAW) processing function on NRW (RAW) images were the opposite of those achieved with adjustment of NEF (RAW) images captured with Nikon digital-SLR cameras (higher settings resulted in bluer images while lower settings resulted in redder images). P7000 settings have been reversed for operation and results similar to that of D-SLR cameras.
An issue that in some extremely rare cases caused NRW (RAW) images to become completely black with editing using the camera’s NRW (RAW) processing function or with RAW processing using ViewNX 2 has been resolved.