Fujifilm X-S1
Samsung ST93
Nikon Coolpix S4150
Kodak Easyshare M5370
Olympus SP-810UZ
Nikon Coolpix L120
Sony Cyber-shot DSC-HX9V
Sony NEX-7
Canon PowerShot S100
Canon PowerShot SX40 HS
Spyder2PRO Studio Review
First announced at the Photokina 2004 photography show, Spyder2 is said to deliver a five-fold increase in sensitivity when compared to the previous Spyder model, resulting in more accurate ICC profiles and monitor colours. Spyder2 is available in a range of different packages - in this review I look at Spyder2PRO Studio, which works with CRT, LCD and notebook displays on both the Windows and MAC platforms. Spyder2PRO Studio includes more sophisticated and flexible calibration software and other bundled extras that are targeted to the advanced amateur and professional photographer. Last year I reviewed the consumer level ColorPlus package, which drastically improved my uncalibrated monitor, so I was intrigued to see if Spyder2PRO Studio could produce even better results. Read my review to find out.
Website: Spyder2PRO Studio Review
Fujifilm X-S1 Review
Samsung ST93 Review
Nikon Coolpix S4150 Review
Kodak Easyshare M5370 Review
Olympus SP-810UZ Review
Canon PowerShot S100
Fujifilm FinePix X10
Canon PowerShot SX40 HS
Nikon Coolpix AW100
Sony NEX-7
#1 Sheila Macdonald
Dear Mike,
I'm very interested in the Spyder and am studying about color management. I have a laptop that I use for my image work. Can this be calibrated by a Spyder? It's a Sony Viao.
Sheila Macdonald
4:54 pm - Monday, May 16, 2005
#2 Felix
Hi Sheila,
yes, you can calibrate CRT and LCD (including notebook) monitors with a Spyder2...
Check out http://www.colorvision.ch/spyder2pro for more info.
9:18 am - Tuesday, May 17, 2005
#3 Mark Goldstein
As Felix has said, yes you can calibrate laptops - they are treated as LCD screens by the Spyder2PRO software.
11:22 am - Wednesday, May 18, 2005
#4 will
Surely you must realize that a review like this is utterly meaningless if you make no comparisons to print output! (?)
3:14 pm - Wednesday, June 29, 2005
#5 Frank van Wensveen
Maybe the Spyder2PRO is better than the original Spyder Pro... which was so bad that it should come with a consumer warning. It's inaccurate, comes with glitchy and clums software, and while it's sold as being suited for flatpanel monitors, it isn't.
Point is, many of the shortcomings of the original Spyder PRO were in the software, which Colorvision discontinued as soon as the Spyder2 PRO came out.
Caveat emptor.
8:21 pm - Friday, July 1, 2005
#6 Daniel Scott
Hm, don't know why the old SpyderPRO didn't work well for you. For me it did an excellent job... On flatpanels as well as CRTs. I got the new one (Spyder2PRO) a few months ago (looks like I should have waited for the photographyblog offer going on now...) and have to say that the software has improved a lot though, the interface just looks much nicer and it allows you to get a detailed explanation for every single step, if you want to). We now use the Spyder2PRO for calibrating all the studio monitors and I gave the old one to a friend (who's still using it on a regular basis, AFAIK)...
What Will said about comparing to print output... Well, it always depends on your situation (do you print at home? /what printer? / what papers or inks? / ...). If you want to make sure you get perfectly matching prints, you'll also need to take care of printer profiling. However, this won't be possible without calibrating your screen first, that should be your first step towards a colour managed workflow. So I think it absolutely makes sense to review the Spyder like that (especially if you consider that probably most visitors haven't looked into colour management at all until now). But hey, maybe there will be a follow-up article on printer profiling some time?
Anyway, great review Mark, thanks. I only wish you had done the special offer sooner...
8:10 am - Tuesday, July 5, 2005
#7 Mark Goldstein
Yes, I will be reviewing a couple of products that do printer profiling, in addition to monitor profiling, in the next few weeks.
12:49 pm - Friday, July 8, 2005
#8 pargiec
6:23 pm - Thursday, July 14, 2005
#9 Gary Porter
I'm confused. My sole objective for wanting to calibrate my monitor is so it matches my prints. Will Syder2Pro allow me to accomplish this? Both Spyder2Plus and Spyder2Pro Studion feature ProfilerPLUS for scanner-based printer profiles - but what does this mean? Does my printer have to have a scanner hooked to it? Why didn't the review cover this?
6:10 pm - Saturday, September 10, 2005
#10 Eugene Kirk
Eugene
8:07 pm - Tuesday, September 12, 2006
#11 Samuel Graham WALKER
Hi,the article was great I only wish I could print out the parts 1.2 etc so I could use them as a visual aid card pack whilst calibrating the monitor.I did try to enlarge them for printing but they became unreadable.Eyes not what they used to be worst luck.but as I said great article and infomative.
Regards,
Samuel Graham Walker
7:31 pm - Saturday, September 8, 2007
#12 John H. Maw
I have had one of these for over 18 months and at times get results that are way off. I use a two monitor setup and sometimes the two are very different, then I do it again with the same settings and I might be able to get them close. Surely the point is repeatability, and that is what I am not getting. Seems very flaky to me.
7:01 am - Saturday, September 12, 2009