Canon iPF6300 Review

August 30, 2010 | Jon Canfield | Printer Reviews | |


With updates from Epson and HP in the large format printer lines, it's not surprising that Canon has come out with updates to their ImagePROGRAF line of printers in the 24" and 44" sizes. The 44" 8300, and 24" 6300 and 6350 (the later includes a hard drive) are identical in functionality, differing in paper and ink capacities - the 8300 also includes a hard drive, more on that later.

I've been lucky enough to use all three printers now - the new Canon iPF6300, the Epson 7900, and the HP Z3200, as well as the older Canon 6100 model that is replaced with the new 6300. While outwardly the printer looks like the 6100 it replaces, there are a number of changes under the covers that make this a solid upgrade.

The Canon line uses a 12 color pigment ink set that has been completely revamped for the x300 series. The Lucia EX as it's known, uses much small pigment particles along with better polymer encapsulation. The end result of this is a gamut increase of approximately 20% over the previous Lucia inkset. The smaller particles reduces reflective scattering increases saturation while the improvements to encapsulation improves ink adhesion that lowers bleed, especially on fine art papers, and improves scratch resistance, something that has been a problem with inkjet prints in general. Along with these improvements, Canon has also reduced bronzing and gloss differential to the point of being virtually unnoticeable on any of the media I printed to.

Along with new inks, Canon has added new printheads to the x300 line. I experienced no clogging or quality issues with the new heads (although I should note that I had no problems with the previous heads found in the 6100). Like HP, Canon uses replaceable printheads. The new heads, of which there are two, cost $450 each should they need to be replaced, a reduction in price from the previous model.

Setup of the Canon iPF6300 is straightforward, and relatively quick. While the outward appearance of the printer is the same, the stand is more rigid than the previous model, making the printer more stable when printing.

Canon provides a set of 90ml ink cartridges to start with (the standard cartridges for the 6300 are 130ml) and a small roll of paper to be used with calibration. Like the previous model, the iPF6300 sips ink, so these starter cartridges will give you quite a bit of printing before you need to worry about replacements.

Canon iPF6300

While large prints are an obvious reason to buy one of these printers, the learning curve compared to a desktop printer can be intimidating. In the past Canon has been tailing the other makers when it comes to ease of use. Paper types aren't always obvious, and the control panel on the printer is the least intuitive of the three brands. With the x300 line, Canon has made great strides in the user interface with a much better button layout and improved help screens on the LCD display. Epson has a beautiful color display on the x900, and provides more info in an easier layout, and the HP dialog and screen is larger with more intuitive navigation, but the Canon interface is now very useable and should cause no issues for first time users.

Canon iPF6300

One area that Canon does excel in is their printing interface. With the imagePROGRAF Print Plug-in for Photoshop you can handle all the printing settings from within one dialog box.  This plug-in, although not listed for CS5, worked fine with that version of Photoshop. There is also a version of the plug-in for use with Canon's Digital Photo Pro software. Windows users will also get PosterArtist Light and plug-ins for Microsoft Office applications.

vCanon iPF6300

Canon also includes a layout utility, accessed from the Printer Setup dialog that makes it easy to print multiple copies of images on a single sheet, as well as resizing and auto placement of the images.

Canon iPF6300

Canon iPF6300

Entry Tags

canon, printer, 24 inch, large format, imagePROGRAF, pigment ink, iPF6300, Canon iPF6300, Canon iPF6300 Review, iPF 6300

Tracker Pixel for Entry

Your Comments

12 Comments | Newest Oldest First | Post a Comment

#1 CA Model and Talent

Just unpacked and set up the 6300.  Took about an hour. Canon makes it easy. Very little if zero calibration required - plug and play basically -pro results. Been printing all morning.  Awesome printer -easy to use and very sophisticated.

10:43 pm - Sunday, March 20, 2011

#2 Arnold

Is this printer good for a starting printing company. How many sheets of paper can it produce for a good business solution

3:52 pm - Wednesday, August 17, 2011

#3 Sam

Arnold, have you ever heard of Google? It’s an awesome SEARCH engine.

11:56 pm - Saturday, September 10, 2011

#4 harun

f?yat?n? bask?kal?tes?n? c?kt?s?n? gormek ?st?yorum eger mumsunse

3:27 pm - Monday, November 14, 2011

#5 Sherry

I’ve just recently purchased the 6300 and I’m impressed with the images I am printing. I’m using a Mac and Photoshop. The problem I am having though is setting a border for my image. I find I am wasting a lot of paper. I am doing gallery wraps so I always have a canvas size. I thought I had fixed my problem when I ticked off the no space between top and bottom but that cut off my canvas and printed right from the image…

2:24 pm - Thursday, November 17, 2011

#6 Sandy

Sherry - It crops it because the program just sees the white. If you have a thin border around the other white border (wrap) it will be fine.

I’ve had my printer for over a year and a few months ago I started getting this strange continuous thin ink line on the reverse of the paper, about 1cm form the side. I presume its from the vacuum, but i cant stop it.  Anyone know anything about this.

3:52 pm - Friday, December 2, 2011

#7 Sherry Hensley / Frames Adrift

Thank you so much Sandy..!!! :-)

4:49 pm - Friday, December 2, 2011

#8 Andrew Dickinson

For anyone who has bought or is looking to purchase the Canon iPF6300 we offer free technical support and advise on profiling for this large format printer. visit us at

5:03 pm - Wednesday, December 14, 2011

#9 Sherry Hensley / Frames Adrift

I have a question for someone…Sandy are you out there? So my question is this. When I’m setting up to print my canvas on my Canon 6300 I set it to print with no room at top or bottom so I’m not wasting canvas on my roll. Then I to to color management and I set that up and I save. It seems when I go from one setting to another the printer doesn’t retain the information because when I print it hasn’t retained the setting for no room at top or bottom. Any advice?
Thanks Sherry :-)

7:08 pm - Tuesday, March 6, 2012

#10 Ken Ness

I purchased a iPF6300 in March 2011. So far it has been installed for 523 days and has printed a total area of 166 sq/m (nothing really is it?). It started to fail about 2 months ago and I hpoed that it was a glitch that might sort itself, but it just got worse. I have contacted Canon who do there usual and ignore you (I’ve had experience of them before), Velmex have not yet come back to me and the people who sold it want £1180+Vat (sorry - out of warrenty!) to repair it. So I plan to scrap it, I’m a retired printer who wanted to use it for my photography and one or two little jobs. Look out for it on eBay. By the way, I wish I’d bought the HP Z3200, brilliant machine except for rear loading.

4:21 pm - Monday, September 24, 2012

#11 Xyl

Conc. guarantee or not, in the Netherlands it is like this: even if you only get one or two years guarantee you are not lost after this period, the law here takes the lifetime of the printer into consideration, that is if the expected lifetime of an ipf6300 is (at least) 10 yrs, this means that after 2 years 20% is used up, meaning that the seller has to pay for 80% of the repair costs, you only 20%.  I suppose it could be similar in the UK, so try to get advice from consumers adviser etc.

7:14 pm - Thursday, December 20, 2012

#12 will

We have the ipf 6300 and the ipf 6400. They still print soft edges. the images as a soft look to them. the printouts are not sharp. Canon should stick to making cameras :(

6:29 pm - Saturday, May 10, 2014