Fujifilm S5 Pro Review

Review Date: July 19th 2007
Author: Gavin Stoker

Leave a comment about this Review

Page 1
Introduction / Ease of Use
Page 2
Image Quality
Page 3
Sample Images
Page 4
Design
Page 5
Specifications
Page 6
Conclusion

Specifications

Type of camera Interchangeable-lens SLR-type digital camera
Number of effective pixels [2] 12.34 million (S-pixel: 6.17million, R- pixel: 6.17million) pixels
CCD sensor 23.0mmx 15.5mm Super CCD SR Pro
Number of recorded pixels L: 4,256x2,848 / M: 3,024x2,016 / S: 2,304x1,536 pixels
Storage media Compact Flash™ (CF) Card (Type I/II) and Microdrive™
File format•Image quality mode Exif-JPEG (Exif2.21 [3] compatible) • FINE/ NORMAL
[Design rule for Camera File System 2.0 compliant /DPOF-compatible] / CCD-RAW(14bit) / CCD-RAW + Exif-JPEG
Lens mount Nikon F mount (with AF coupling and AF contacts)
Usable lenses Type DX AF Nikkor: All functions supported
Type G or D AF Nikkor (IX Nikkor lenses can not be used): All functions supported
Micro Nikkor 85 mm f/2.8D: All functions supported except autofocus and some exposure modes
Other AF Nikkor (excluding lenses for F3AF): All functions supported expect 3D color matrix metering II and 3D multi-sensor balancedfill-flash for digital SLR
AI-P Nikkor: All functions supported except 3D color matrix metering II,3D multi-sensor balanced fill-flash for digital SLR, and autofocus
Non-CPU: Can be used in exposure modes A and M; electronic rangefinder can be used if maximum aperture is f/5.6 or faster; color matrix metering, multi-sensor balanced fill-flash for digital SLR, and aperture value display supported if user provides lens data
Lens servo Single Servo AF(S) / Continuous Servo AF(C) / Manual focus(M)
Picture angle Approx. 1.5x focal length in 35mm format equivalent
Sensitivity AUTOISO 100 / 125 / 160 / 200 / 250 / 320 / 400 / 500 / 640 / 800 / 1000 / 1250 / 1600 / 2000 / 2500 / 3200 (Standard Output Sensitivity)
Auto focus TTL. AF assist illuminator.
Focus areas Normal: 11 areas; single area or group can be selected; Wide: focus area can be selected from 7 areas
AF Area mode 1) Single Area AF 2) Dynamic AF 3) Group Dynamic AF 4) Dynamic AF with closest subject priority
Shutter speed 30 sec. to 1/8000 sec.  Bulb.
Continuous shooting CH : Up to max. 3 frames/sec. ([D-RANGE] set to[100%(STD)]) / Up to 1.5 frames/sec. ([D-RANGE]set to WIDE (other than [100%(STD)])
CL : Up to max. 2 frames/sec. ([D-RANGE] set to[100%(STD)]) / Up to 1.5 frames/sec. ([D-RANGE]set to WIDE (other than [100%(STD)]), and 1 frames/sec.
Auto bracketing Number of shots 2-9 compensated EV value 1/3 1/2 2/3 1 EV step.
Exposure metering system Three-mode through-the-lens (TTL) exposure metering.
3D Color Matrix Metering II (metering performed by 1,005-segment RGB sensor) / Center-weighted / Spot
Exposure compensation -5.0EV to +5.0EV Step can be selected from 1/3, 1/2, 1EV step.
Exposure modes Programmed Auto with flexible program [P], Shutter-Priority Auto [S], Aperture-Priority Auto [A], and Manual [M]
White balance Automatic / Incandescent light / Fluorescent lamp (1-5) / Fine / Flash / Shade / Colour temperature / Preset Custom (1-5)
Fine tuning can be set.
Film Simulation (STANDARD) / F1 / F1a / F1b / F1c / F2
Colour Space sRGB / Adobe RGB (1998)
Dynamic Range AUTO / 100%(STD) / 130% / 170% / 230% (W1) / 300% / 400% (W2)
Viewfinder Fixed-eye level pentaprism, built-in diopter adjustment
Frame coverage: Approx. 95%, Magnification: Approx. x 0.94
LCD back monitor 2.5-inch approx. 230,000 pixels low temperature polysilicon TFT color LCD (approx. 100% frame coverage for playback)
Built-in flash Manual pop-up with button release. Guide No. 12 (ISO 100, m). 
i-TTL balanced fill-flash or standard i-TTL flash.
Flash synchronisation up to 1/250 sec.
Accessory shoe Standard ISO-type with hot-shoe contact (Safety lock provided)
Flash control 1) TTL: TTL flash control by 1,005-pixel RGB sensor
Built-in flash: i-TTL balanced fill-flash or standard i-TTL flash (spot metering or mode dial setto [M])
SB-800, 600 or SB-R200: i-TTL balanced fill-flash for digital SLR and standard i-TTL flash for digital SLR
2) Auto aperture: Available with SB-800 with CPU lens
3) Non-TTL Auto: Available with flash such as SB-800, SB-80DX, SB-28DX, SB-28, SB-27, and SB-22s
4) Range-priority manual; available with SB-800
Remote release Electronic shutter release
Video output NTSC / PAL selectable [3]
Digital interface USB 2.0 (High-Speed)
Sync contact X-contact only: flash synchronisation up to 1/250 sec.
Synchronisation terminal Equipped with ISO 519 synchronisation terminal as standard, lock screw provided
DC input AC Power Adapter AC-135VN (Optional)
Power source Rechargeable Li-ion battery (included) or AC Power Adapter AC-135VN (Optional)
Dimensions 147mm(W) x 113mm(H) x 74mm(D) / 5.8in. (W) x 4.4in. (H) x 2.9in. (D) (not including accessories and attachments)
Camera mass (weight) Approx. 830 g/29.3 oz. (not including accessories, battery and memory card)
Guide to the number of available frames for battery operation Approx. 400 frames [4]
Accessories included Rechargeable Li-ion battery NP-150, Battery charger BC-150, Shoulder strap, Camera body cap, Eyepiece cap, LCD cover, USB cable(mini-B), Videocable, Accessory shoe cover, Synchronizing terminal cap, Remote release socket cap, CD-ROM [ image browser with CCD-RAW converting function ]
Optional accessories Rechargeable Battery NP-150, Battery Charger BC-150, AC Power Adapter AC-135VN, Hyper-Utility Software HS-V3, Hyper-Utility Software HS-V3UP [5]

*Subject to change

[2] The number of pixels on the image sensor which receive input light through the optical lens, and effectively reflected in the final output data of the still image.

[3] Exif2.21 is a newly revised digital camera file format that contains a variety of shooting information for optimal printing.

[4] When connecting the Video cable (included) to TV, the camera's screen is turned off.

[5] "CIPA DC-002-2003 Standard Procedure for Measuring Digital Still Camera Battery Consumption" (extract); Using included rechargeable Li-ion battery NP-150, AF50mm F1.4D lens, Compact Flash™ (CF) Card. Pictures shall be taken at a temperature of 23°C(73.4F) every 30 seconds, the flash used at full power every second shot and the camera turned off and then on again once every 10 shots.

[6] HS-V3UP is an upgrade package for HS-S2 and HS-V2.

Page 1
Introduction / Ease of Use
Page 2
Image Quality
Page 3
Sample Images
Page 4
Design
Page 5
Specifications
Page 6
Conclusion

DIWAPhotographyBLOG is a member of the DIWA organisation. Our test results for the Fujifilm S5 Pro have been submitted to DIWA for comparison with test results for different samples of the same camera model supplied by other DIWA member sites.

Compare Prices

Support PhotographyBLOG: Buy the Fujifilm S5 Pro from one of our affiliate retailers: