Pro Gear Duo Memory Card Reader
Review Date: August 27th 2004
Introduction
When
I first bought a digital camera a couple of years ago (the
Minolta DiMAGE 5), I also purchased a Hama compact flash card
reader for the grand total of £7.95. This reader is
still going strong today, but with the advent of USB 2.0 and
Firewire, the USB 1.0 Hama reader is slow in comparison and
it is also obviously limited in terms of the number of memory
card formats that it supports. Enter the Pro Gear range of
memory card readers from the US-based Atech Flash Technology,
which offer transfer rates of up to 480 Mb/sec via a USB 2.0
connection and support 10 different memory card formats. The
Pro Gear Duo consists of two devices; a docking bay that fits
into the 3.5" drive bay of your computer, and the cartridge-like
PRO Gear USB 2.0 flash media reader, which you can either
insert into the docking bay or attach to your computer using
a USB cable. Unfortunately my PC doesn't have a spare drive
bay, so this is really a review of the flash media reader
(which is also available to purchase separately as the Pro
Gear Solo). So is the Pro Gear worth upgrading to? Find out
in my short review.
Price
The Pro Gear Duo has a recommended retail price of around
$40.
Design
 |
| Front of the Retail Packaging |
| |
 |
| Rear of the Retail Packaging |
| |
 |
| Front of the Pro-Gear Reader |
| |
 |
| Rear of the Pro-Gear Reader |
| |
 |
| Front of the Pro-Gear Reader |
| |
 |
| Front of the Pro-Gear Dock |
| |
 |
| Pro-Gear Reader and the Pro Gear
Dock |
Features and Ease-of-Use
The Pro Gear Duo retail package includes:
- 1 x Card Reader
- 1 x Docking Station
- 1 x External USB A to mini Cable
- 1 x Internal USB Cable
- 1 x Internal IEEE 1394 Cable
- 1 x Setup Disk
- 1 x User's Manual
The card reader has a transfer rate of up to 12 Mb/sec via
USB 1.1 and up to 480 Mb/sec via USB 2.O. The operating systems
that it supports are Windows 98 & 98 SE / 2000, Windows
ME / XP (no driver required) and Mac OS 9.1 or later.
Installation of the card reader on my computer running Windows
XP was very straightforward. You just have to attach it to
the PC using the supplied USB 2.0 cable and Windows XP automatically
recognises the device and assigns a drive in Windows Explorer
to each of the 3 memory card slots. On older operating systems
you have to insert the setup disk and install some software
drivers - this is clearly explained in the manual.
As my PC doesn't have a spare drive bay, I was unable to
install and test out the docking station part of the Pro Gear
Duo.
The main reasons that people will buy a reader like the Pro
Gear Duo/Solo are the fast transfer speed and the large number
of supported memory cards. I tested the speed of the device
by transferring 32Mb of digital image files from 3 different
memory cards onto my PC, and compared it to my old Hama USB
1.0 compact flash card reader, as shown in the table below:
| |
Download Transfer
Time
(from card to computer, of 32Mb) |
Upload Transfer Time
(from computer to card, of 32Mb) |
| Memory Card Format |
Pro-Gear Duo |
Hama |
Pro-Gear Duo |
Hama |
Compact Flash
(PQI Hi-Speed 512Mb) |
6 seconds |
15 seconds |
20 seconds |
45 seconds |
XD-Picture Card
(Olympus 32Mb) |
6 seconds |
- |
45 seconds |
- |
SD Card
(Fujifilm 128Mb) |
5 seconds |
- |
26 seconds |
- |
I didn't experience any problems with using a variety of
different memory cards in the card reader during the duration
of the review. One small benefit that I found useful was the
ability to directly transfer files between memory cards in
the 3 different cardslots.
The card reader itself is designed to be pocketable and is
therefore very light, but not flimsy or poorly-constructed
in any way. The only slight problem that I found was the USB
connection at the back of the device was quite sensitive in
terms of plugging-in the USB cable. The connection to the
computer was lost by very slightly pulling out the cable,
which could be done accidentally. Other than this issue, I
didn't find any other problems with the operation of the Pro
Gear card reader.
Conclusion

(out of 5 stars)
The Pro Gear Duo is a fit and forget kind of product that
will definitely save you a lot of time when it comes to transferring
files from your digital memory cards to your computer. The
fact that it supports and works well with 10 kinds of memory
formats will be great news for anyone who has a number of
digital devices that all use different storage cards - photography
website editors included! The Pro Gear Duo is light, portable
and well-made; only the slight niggle with the USB connection
spoils an otherwise impeccable performance. A highly recommended
upgrade for anyone who is currently using a USB 1.0 card reader
or who owns more than one type of memory card format.
Related Links
Atech Flash
Technology
Leave a Comment about this Review
|