Fujifilm X-T3 Version 3.10 and 3.20 Firmware Updates

November 27, 2019 | Mark Goldstein | Compact System Camera | Comment |

Fujilm have announced plans to release a series of firmware updates for the X-T3 camera, starting in mid-December 2019.

Version 3.10 will enable controls for video recording from a gimbal or drone.

Version 3.20 will improve the tracking performance of the eye AF frame and add the capability to save up to 9,999 pictures in each folder on an SD card.

Fujifilm Press Release

Fujifilm to release firmware update for the FUJIFILM X-T3

Enabling video shooting control from Gimbal / Drone and offering other feature enhancements

November 13, 2019

Updated : November 26, 2019

FUJIFILM Corporation (President: Kenji Sukeno) plans to release a series of firmware updates for the FUJIFILM X-T3 (hereinafter “X-T3”), starting in mid-December 2019. The updates reflect requests of additional features and operability improvement, received from users of the X Series of mirrorless digital cameras.

The upcoming update will enable controls for video recording from Gimbal / Drone via USB communications. You can combine the X-T3 with a Gimbal / Drone that supports this function to significantly broaden your shooting options. FUJIFILM is in communication with Shenzhen Gudsen Technology Co., Ltd.*, SZ DJI Technology Col, Ltd.** and ZHIYUN*** (listed in the alphabetical order) about their plan to release compatible products. Fujifilm also plans to deploy this function to the FUJIFILM X-T30 and other models. Further firmware updates in the future will bring autofocus enhancement and other improvements to the X-T3.

Main features

Firmware update for the X-T3, due to be released in December 2019

Firmware version: FUJIFILM X-T3 (Ver. 3.10)

Gimbal / Drone support*4

This firmware adds the following function to complement the current support for still image shooting via USB communications:

  • Starting and ending video recording
  • Adjusting exposure settings (exposure mode, shutter speed, aperture, ISO sensitivity, exposure compensation) for video recording
  • Making manual focus adjustments

Firmware update for the X-T3, due to be released in January 2020

Firmware version: FUJIFILM X-T3 (Ver. 3.20)

  • 1. Enhanced autofocus

Improving the tracking performance of the eye AF frame, making it easier to attain accurate autofocus on the eyes

Improving face-detection performance when there are faces of different sizes within the same frame, making it easier to attain accurate autofocus

Improving autofocus capability on a foreground subject even when there is a mixture of foreground and background subjects within a frame, causing the foreground subject to go out of focus, e.g. when shooting flowers against a busy background

2. Capability to save up to 9,999 pictures in each folder

Until now, the number of pictures that can be saved in a folder on an SD card was limited to 999. This update will raise the limit by ten times to 9,999 pictures.

*Shenzhen Gudsen Technology Co., Ltd.

**SZ DJI Technology Co., Ltd.

***ZHIYUN

*4USB-based communications



Your Comments