The Phottix Indra500LC is the first studio light compatible with Canon’s radio flash system. The 500Ws Phottix Indra500LC TTL has the power and control of the Canon RT and Phottix Laso triggering systems built-in. Users can switch between TTL and Manual modes, adjust EV and manual power levels and use high-speed sync, all from the Canon ST-E3, compatible Canon RT Speedlites and the Phottix Laso Transmitter - no extra hardware is needed. In Manual mode the Indra500LC offers 8 stops of power adjustments - from full power to 1/128 in 1/3rd stop increments. With Stroboscopic Mode, the Phottix Indra can be used for special effect and creative shooting with flash frequencies of 1-100HZ and flash counts of 1-100 times. The Indra500LC comes with a Li-Ion battery, cables, charger, carrying bag and a new, smaller 5” reflector, with a suggested retail price of $1,299. Availability is slated for October.

Phottix Press Release

Introducing the Phottix Indra500LC

September 20, Koln, Germany: Phottix presents the first studio light system compatible with Canon’s radio flash system. The Indra500 TTL, introduced in 2014, was the next generation of Phottix’s innovative TTL products – the Indra500LC takes that one step further – incorporating the radio control and triggering of the Canon RT and the Phottix Laso triggering systems. The Indra500LC gives photographers 500W/s of TTL power, opening up new possibilities and allowing photographers to shoot in shutter and aperture priority modes with incredible power.

High Speed Sync

With the Phottix Indra500LC TTL’s High Speed Sync function photographers can shoot at higher sync speeds* allowing wider apertures while still being able to control ambient light. In manual mode the Indra500LC offers 8 stops of power adjustments - from full power to 1/128 in 1/3rd stop increments. With Stroboscopic Mode, the Phottix Indra can be used for special effect and creative shooting with flash frequencies of 1-100HZ and flash counts of 1-100 times.

Built-in Triggering

The Phottix Indra500LC TTL has the power and control of the Canon RT and Phottix Laso triggering systems built-in. Switch between TTL and Manual modes, adjust EV and manual power levels and use high speed sync, all from the Canon ST-E3, compatible Canon RT Speedlites and the Phottix Laso Transmitter - no extra hardware is needed.

Canon non-RT Flashes

One of the best things of the Phottix Laso Triggering system is its ability to incorporate older non-radio Canon flashes into a photographer's workflow. There’s no need to set aside older non-RT flashes such as the venerable 580 EXII – add a Phottix Laso Receiver and gain the ability to control and trigger it. Add legacy flashes, Canon RT-enabled flashes – and the Phottix Indra500 LC for a complete lighting solution. 

"This the next logical step for the Indra series," said Phottix CEO Steve Peer. "Canon users can now build on their current lighting system and retain the amazing functionality that system offers"

The Indra500LC comes with a Li-Ion battery, cables, charger, carrying bag and a new, smaller 5” reflector to make the Indra500 LC easier to pack and take on location.

The Phottix Indra500LC will start to ship in mid-October 2016 with a suggest retail price of $1299 USD.

*On compatible cameras.

Your Comments