SparkPlug has developed a tiny LED flash that plugs into the dock connector on the iPhone, lighting the scene for photos or video. The flash itself is small enough to be attached to a key-ring and draws minimal power from the phone.  The built-in touch sensor detects a finger press on the back of the module, turning on a 96 lumen beam of light, which can also be used as a flashlight.  The flash is designed to fit through the opening in most iPhone cases for the dock cable, so there is no need to remove your case. The SparkPlug Flash is available through the website below priced at $14.95.

Website: SparkPlug Flash

SparkPlug Industries Press Release

SparkPlug Industries improves photos taken with the 3G, 3GS and original iPhone with a plug-in LED camera flash.

Photos taken with the camera in the 3G, 3GS and original iPhones have often been a disappointment in low or dim lighting, especially outdoors at night. SparkPlug has developed a tiny LED flash that plugs into the dock connector on the iPhone, lighting the scene for photos or video. See the demo photos on our website for more evidence.

The flash itself is small enough to be attached to a key-ring and draws minimal power from the phone, avoiding chargers or battery replacement. The built-in touch sensor detects a finger press on the back of the module, turning on a 96 lumen beam of light, which can also be used as a flashlight. The touch control allows the flash to be used within existing apps without requiring an additional app. The flash is designed to fit through the opening in most iPhone cases for the dock cable, so there is no need to remove your case to use the SparkPlug Flash. The flash is built in the USA using Cree LED’s for quality brightness and has a 12 month warranty.

The SparkPlug Flash is available through our website at www.SparkPlugFlash.com for $14.95, including free shipping, during our current promotion.

Your Comments