Tamron 17-35mm F/2.8-4 Di OSD for Canon Mount

September 4, 2018 | Mark Goldstein | Lenses | Comment |

The Tamron 17-35mm F/2.8-4 Di OSD lens is now available for Canon DSLR cameras, as well as Nikon. It will launch on October 2nd 2018.

Tamron Japan Press Release

A sophisticated balance of outstanding optics and matchless mobility

Tamron announces the launch of the 17-35mm F/2.8-4 Di OSD (Model A037) for Canon mount

September 4, 2018, Saitama, Japan–Tamron Co., Ltd. (President & CEO: Shiro Ajisaka), a leading manufacturer of optics for diverse applications, announces the launch of the 17-35mm F/2.8-4 Di OSD (Model A037) for Canon mount.

lens: Model A037

Model A037

PRODUCT NAME 17-35mm F/2.8-4 Di OSD (Model A037)

For Canon mount

DATE OF LAUNCH October 2, 2018

The lens is already available for Nikon mount cameras.

Product Information

1. High-performance imaging for shooting vast landscapes in sharp detail

The optical construction (15 elements in 10 groups) uses four LD (Low Dispersion) lens elements to minimize axial chromatic aberrations that can occur with ultra-wide-angle zoom lenses. With two properly positioned GM (Glass Molded Aspherical) lenses, distortion and other aberration can be satisfactorily corrected as well. Being the smallest and lightest in its class* and dedicated to high quality imaging, the engineers have paid particular attention to size. The lens has also been carefully designed to allow peripheral point image reproducibility and thereby facilitate a high degree of sharpness and contrast. The Minimum Object Distance (MOD) for the entire zoom range is a short 0.28m (11 in), so background blurring is still possible when opening the aperture and approaching the subject close-up with this ultra-wide-angle zoom. 

* Among ultra-wide-angle zoom lenses using an F-stop faster than F/4 for 35mm full-frame DSLR cameras. (As of July 2018: Tamron)

2. Advanced coating technology along with proprietary ghosting analysis simulation technology enables backlighting control

Resistance to backlighting is extremely important for wide-angle lenses as they are often subjected to strong light sources. The Model A037 has a high level optical construction that repeatedly employs comprehensive ghosting analysis simulation. The BBAR (Broad-Band Anti-Reflection) Coating is highly effective in reducing reflection, allowing ghosting and flare throughout the entire zoom range to be controlled.

3. OSD (Optimized Silent Drive) enables both excellent AF and minimum drive noise

The AF drive system employs an OSD (Optimized Silent Drive) to ensure quiet operation. Through the innovative optimization of the system that includes AF system speed reduction gear, Tamron was able to greatly reduce the drive noise in comparison to conventional AF types with built-in DC motors. AF performance and speed have also been vastly improved. Thus, even if silence is required, AF can be employed without having to worry at all about noise creation. The Model A037 is able to provide superlative AF precision for exact focus even when shooting moving objects, as well as outstanding trackability.

4. Circular aperture to produce a smooth-edged bokeh

A 7-blade diaphragm is configured to retain a smooth, circular-shaped aperture opening even when stopped down by two stops from the wide-open aperture. This produces a smooth-edged bokeh in background light spots and avoids rugged aperture geometry.

5. Moisture-Resistant Construction

Seals are located at the lens mount area and other critical locations to prevent infiltration of moisture and/or rain drops to provide Moisture-Resistant Construction. This feature affords an additional layer of protection when shooting outdoors under adverse weather conditions.

6. Fluorine Coating

The surface of the front element is coated with a protective fluorine compound that has excellent water- and oil-repellant qualities. The front surface is easier to wipe clean and is less vulnerable to the damaging effects of dirt, dust, moisture or oily fingerprints, allowing for much easier maintenance. The coating also provides an enhanced level of durability, and will sustain its effectiveness for years.

7. Compatible with TAMRON TAP-in ConsoleTM, an optional accessory

The new Model A037 is compatible with the TAMRON TAP-in Console, an optional accessory product that provides a USB connection to a personal computer, enabling users to easily update a lens’s firmware as well as customize features including fine adjustments to the AF.

Specifications

Model A037

Focal Length 17-35mm

Maximum Aperture F/2.8-4

Angle of View (diagonal) 103°41'-63°26' (for full-frame DSLR cameras)

78°46'-43°29' (for APS-C format DSLR cameras)

Optical Construction 15 elements in 10 groups

Minimum Object Distance 0.28m (11 in) full zoom range

Maximum Magnification Ratio 1:4.9 (f=35mm)

Filter Size φ77mm

Maximum Diameter φ83.6mm (3.3 in)

Length* 92.5mm (3.6 in)

Weight 460g (16.2 oz)

Aperture Blades 7 (circular diaphragm)**

Minimum Aperture F/16-22

Standard Accessories Lens hood, Lens caps

Specifications, appearance, functionality, etc. are subject to change without prior notice.

* Length is the distance from the front tip of the lens to the lens mount face.

**The circular diaphragm stays almost perfectly circular up to two stops down from maximum aperture.



Your Comments