Canon EF 16-35mm f/4L IS USM Review
June 30, 2014
|
Mark Goldstein
|
Specifications
OPTICAL FEATURES/SPECIFICATIONS
| Angle of view (horzntl, vertl, diagnl) | 98° - 54°, 74°10′ - 38°, 108°10′ - 63° |
|---|---|
| Lens construction (elements/groups) | 16/12 |
| No. of diaphragm blades | 9 |
| Minimum aperture | 22 |
| Closest focussing distance (m) | 0.28 |
| Maximum magnification (x) | 0.23x (at 35mm) |
| Distance Information | Yes |
| Image stabilizer* | 4.0 |
| AF actuator | Ring USM¹ |
PHYSICAL SPECIFICATIONS
| Dust/moisture resistance** | Yes |
|---|---|
| Filter diameter (mm) | 77 |
| Max. diameter x length (mm) | 82.6 x 112.8 |
| Weight (g) | 615 |
ACCESSORIES
| Lens cap | E-77 II |
|---|---|
| Lens hood | EW-82 |
| Lens case/pouch | LP1219 |
| Rear cap | Lens Dust Cap E |
| Magnification w/ Extension Tube EF12 II | 0.63-0.36¹ |
| Magnification w/ Extension Tube EF25 II | 1.12-0.80¹ |
| Extender Compatiblity | Not Compatible |
| Other Accessories | Close-up lens 500D, tele only - 0.07 to 0.28x Gelatin Filter Holder IV for full telephoto only |
| AF actuator | ¹ Full time Manual focus |
|---|---|
| Magnification w/ Extension Tube EF12 II | ¹ Not Compatible at wide angles |
| Magnification w/ Extension Tube EF25 II | ¹ Not Compatible at wide angles |
- * Tested under CIPA standards
- ** Lenses with dust/moisture resistance are fitted with a rubber ring on the lens mount which may cause sligth abrasion of the camera mount.
- This in no way effects either the lens or camera performance.